Cleaning Tips & Demos

Your new cleaning BFF

Our signature Low-Moisture Eco-Active Foam System is designed with busy parents in mind — delivering a simple, effective clean without the extra steps.

Pro tip: For best results, always use Lil’ Cruiser Cleaner with our Premium Microfibre Cleaning Mitt.

Good to know:
For fabrics only. Not intended for harness straps, buckles, or hardware.
👉 Always follow your manufacturer’s care guidelines and spot test before use.

Step-by-Step Cleaning Guide

1) REMOVE LOOSE YUCKS

Vacuum, sweep, or use the Microfibre Cleaning Mitt to remove any loose yucks, crumbs, debris, etc
2) PREP YOUR MITT

Rinse with warm water and wring thoroughly to almost dry
3) APPLY FOAM

Apply 1–2 pumps of foam onto the mitt to ensure controlled, precise application. Avoid applying directly to the fabric. Apply more foam as needed.
4) ACTIVATE THE CLEAN

Mush the foam into the mitt, then massage into fabric. Wipe down all fabric surfaces. Blend evenly. DO NOT use on harness straps, buckles, or hardware

5) STUBBORN STAINS

Some stubborn stains may require a bit of muscle. Expect 1–3 passes with gentle agitation. Occasionally, older stains trapped beneath the surface may rise. A second clean typically does the trick.
6) REFRESH MITT

Rinse the mitt out with warm water and wring thoroughly.
7) REPEAT IF NEEDED

Leave the car seat, stroller, and mitt to air dry. Walk away, you're done for the day!
8) SNAP A BEFORE & AFTER PIC

Seeing the results is always SO satisfying!